Automatika VArio F1SCTH - Filtration + Lighting + Dosing with Own Measurement + Heat Pump + Attraction

The automation includes the built-in DIN module of the intelligent VArio pool control and is intended for the easiest installation and electrical connection. There are sockets on this automation with descriptions of which technology they are intended for.

Thanks to the intelligent VArio system, it is possible to control individual elements of pool technology via the internet, local WIFI network or using a remote control. It is always necessary to purchase a WIFI module or RC module for the DIN module. The DIN module itself does not have a control interface.

More information about individual systems for control can be found in the "Download" tab.

The ideal basic combination is the VArio DIN module automation with the WiFi module, which not only allows pool control via the internet, but also remote support for the pool and system diagnostics via the internet.

The system can be supplemented with an RC module for direct local control. The RC module also has IP 65 protection, which makes it resistant to spraying water or rain and can be located, for example, next to the pool even during swimming.

Installation - 3 simple steps:

• Attach the automation to the wall
• Connect the pool technologies to the respective sockets
• Connect the entire automation to the electrical network

The F1SCTH automation can be connected to:

• Single-phase filtration (230 V)
• Lighting
• Dosing device with own measurement (VA DOS / VA SALT SMART, communication cable required)
• Heat pump with a power of up to 10 A / 2.2 kW
• Attraction with a power of up to 10 A / 2.2 kW

VArio automation can also be customized for specific installations -- use the order form in the "Download" tab to request a price quote.

Note: When installing the intelligent VArio system on an existing installation, we recommend consultation regarding communication with the dosing station.

.