Automatika VArio F1SP1CT - Filtration + Lights + Counterflow 230V + Dosing with Own Measurement + Heat Pump

The automation includes a built-in DIN module of the VArio pool intelligent control and is used for the easiest possible installation and electrical connection. The sockets on this automation have descriptions indicating for which technology they are intended.

Thanks to the intelligent VArio system, individual elements of pool technology can be controlled via the internet, local WIFI network, or by means of a remote control. The WIFI module or RC module must always be purchased separately for the DIN module. The DIN module itself does not have a control interface.

For more information about individual control options, please refer to the "Download" tab.

The ideal basic combination is the VArio DIN module automation with the WIFI module, which allows not only pool control over the internet but also remote support for the pool and system diagnostics via the internet.

The set can be completed with the RC module for direct local control. In addition, the RC module has an IP 65 protection rating, making it resistant to splashing water or rain and can be placed next to the pool even during swimming.

Installation - 3 easy steps:

• Secure the automation to the wall
• Connect the pool technologies to the corresponding sockets
• Connect the entire automation to the electrical network

The F1SP1CT automation can be connected to:

• Single-phase filtration (230V)
• Lighting
• 230V counterflow with power up to 16A / 3.5kW
• Dosing device with own measurement (VA DOS / VA SALT SMART, communication cable required)
• Heat pump with power up to 10A / 2.2kW

VArio automations can also be ordered tailored to a specific installation. To request a price quote, please use the order form found in the "Download" tab.

Note: In case of installing the VArio intelligent system on an existing installation, we recommend consulting regarding communication with the dosing station.

.