Automatika VArio F1SP3CTH - Filter + Lights + Counterflow 400V + Metering with own measurement + Heat pump + Attraction

The automation includes a built-in DIN module of VArio intelligent pool control and is intended for the easiest possible installation and electrical connection. The automation unit has sockets with descriptions for which technologies they are intended.

Thanks to the intelligent VArio system, it is possible to control individual components of pool technology via the internet, local WIFI network, or using a remote control. To the DIN module, it is always necessary to purchase a WIFI module and/or RC module. The DIN module alone does not have a control interface.

For more information on individual control systems, see the "Download" tab.

The ideal basic combination is the VArio DIN module automation with a WiFi module, which not only allows pool control via the internet but also remote support of the pool and system diagnostics via the internet.

The system can be supplemented with an RC module for direct local control. The RC module also has an IP 65 cover, which makes it resistant to splashing water or rain, and it can be installed, for example, next to the pool even during swimming.

Installation - 3 simple steps:

• Secure the automation on the wall
• Connect pool technologies to the respective sockets
• Connect the entire automation to the power supply

The following components can be connected to the F1SP3CTH automation:

• Single-phase filtration (230 V)
• Lighting
• Counterflow 400 V
• Metering device with its own measurement (VA DOS / VA SALT SMART, communication cable required)
• Heat pump with a power of up to 10 A / 2.2 kW
• Attraction with a power of up to 10 A / 2.2 kW

VArio automation can also be ordered for a specific installation -- for a price quote, use the order form, which can be found in the "Download" tab.

Note: In the case of installing the VArio intelligent system on an existing installation, we recommend consulting regarding communication with the dosing station.

.