Electric flow heaters are designed for heating water in pools and hot tubs, the operation involves heating the flowing water with a heating element, the temperature of the heated water is regulated by a thermostat. The heating element is controlled by a relay, which is operated by the aforementioned thermostat, and a safety flow indicator. For this reason, a so-called large automation is required for heating - a 24-hour filtration programmer, a current protector (protection against dangerous touch voltage), thermal protection of the motor, relay, and heating switch.

Pool electric flow heaters of the types EOV, EOVp, EOVk, EOVTi, EOVnTi, and EOVn are specially designed for heating pool water or water in other water circuits with a flow rate and temperature up to 40°C. Each heater must be installed in an electrical system behind a current protector. Therefore, we recommend supplementing the device with a suitable type of automatic control from Vágner, which reliably ensures not only the desired convenience but also safety of operation. The difference between EOV and EOVp lies in the use of plastic on the actual body covering and the use of a flow valve instead of a pressure switch as a protective element for water flow.

Each EOV electric heater:

utilizes the conversion of electrical energy into heat energy
is made of high-quality stainless steel with a high percentage of TITANIUM AISI 316 (EOV type)
is made of high-quality PVC (EOVp type)
has a heating cartridge made of stainless material INCOLOY 800 with a high percentage of TITANIUM, ensuring the best quality
is 100% tested for tightness
can be connected to a water circuit via a 1.5" thread, 50mm hose, or 50mm glue
is equipped with a thermostat up to 40°C and a thermal cut-off
is equipped with a pressure switch that monitors water flow (EOV type)
is equipped with 2 brackets for easy installation
higher outputs up to 36 kW available upon agreement
EOVk is identical to the EOV type, only the water flow through the device is monitored by a flow switch

Operating conditions:

Minimum water flow: 4 m³/h
Operating pressure: 0-3 bar
Connection: into a water circuit with a pipe diameter of 50 mm
Water quality: chloride content max. 150 mg/l
chlorine content max 1 mg/l
pH range 7.0-7.8

Warranty

This product has 12 month warranty. In the event of a product breakdown within the warranty period, you should contact us as soon as possible.

The Buyer has the right to make his defective goods claim within 12 months of accepting the goods. If a defect manifests itself within six months of the Buyer accepting the goods, such goods are presumed to be defective at acceptance unless the Seller proves otherwise.

Returns

Should you require any further information, please email sales@aquinium.co.uk where we will respond to your request quickly.

More information Terms and conditions

Stock

This product is in stock at our warehouse and is ready for Standard or Express delivery Service.

Delivery – Mainland UK

Delivery Times: - Standard delivery: 1-2 weeks

Most of our products, when ordered by 12 PM Monday to Friday, will be dispatched for next-day delivery . In cases where items are not in stock or are special orders, delivery times may be longer.

Rest assured, we will contact you beforehand to provide an estimated delivery date.

If you have specific delivery instructions, such as gifting or a required delivery date, please include them in your order.

If your billing address is different from the delivery address, you can provide the latter separately in the order form. We will accommodate the delivery address if possible under contractual conditions.

Please note that some areas of Scotland, Northern Ireland, the Isle of Man, and the Isle of Wight may incur extra carriage charges.

Please check your delivery

If you sign for a delivery as "OK" and later discover that it's damaged, our carriers will not accept liability, and you may be charged for the damaged items. In such cases, we will make a delivery charge for replacement items.

Please sign for your delivery as "UNCHECKED" if you're unable to thoroughly check it upon receipt. If there is any damage to the package, no matter how small, please sign for it as "DAMAGED". We cannot make claims for any damaged items that haven't been signed for as "UNCHECKED" or "DAMAGED".

If you sign for your goods as "DAMAGED", please notify us within 72 hours by email at sales@aquinium.co.uk

More information Terms and conditions