In stock
In stock
SKU
vp-5801209
£693.77
In stock
SKU
vp-5801209
Enter a value ...
inc VAT
from
Price
Product code
Electric flow heaters are designed for heating water in pools and whirlpools. The operation consists of heating the flowing water with a heating element, and the temperature of the heated water is regulated by a thermostat. The heating element is controlled by a relay, which is controlled by the aforementioned thermostat, with a safety indicator of flow. Therefore, heating requires a so-called large automation - a 24-hour filtration programmer, a current protector (protection against dangerous touch voltage), thermal protection of the motor, relay, and heating switch. The entire heating system is made of stainless steel titanium material (for salt water) or plastic.
Swimming pool electric flow water heaters of types EOV, EOVp, EOVk, EOVTi, EOVnTi, and EOVn are specially designed for heating pool water or water in other water circuits with a flow and temperature of up to 40°C. Each heater must be installed in the electrical system behind a current protector. Therefore, we recommend complementing the device with a suitable type of automatic control from the company VÁGNER, which reliably ensures not only the desired comfort but also the safety of operation.
Electric heating EOVTi:
- Uses electrical energy to produce heat energy
- Made of high-quality PVC
- Equipped with a TITANIUM heating cartridge. TITANIUM is the most corrosion-resistant material available
- 100% tested for leaks
- This type of heating is suitable for abnormal stress and higher chlorine concentration. It can be used in combination with any water treatment, such as electro-chemical salt chlorinators, etc.
- Equipped with a thermostat up to 40°C and a thermal fuse
- Equipped with a flow switch that controls the water flow
- Equipped with 2 brackets for easy installation
Operating conditions:
- Minimum water flow: 4 m3/h
- Operating pressure: 0-3 bar
- Connection: to the water circuit with a pipe diameter of 50 mm
- Water quality: chloride content max. 150 mg/l
- chlorine content max. 1 mg/l
- pH range 7.0-7.8
