Sand filtration set BRILIX FSP350 for swimming pools up to 24 m³

Treat yourself to a swim in crystal clear water! The high-quality FSP350 sand filtration will rid your pool of even the smallest impurities. The sand filtration ensures convenient and highly effective water purification, which also saves you the cost of pool chemicals. Easy self-installation and simple maintenance.

Effective cleaning of your pool can be guaranteed by one of our sand filtration systems, the FSP350 complete sand filtration system. This product should definitely not be missing in your pool accessories, as it effectively saves time and makes swimming in your pool more enjoyable. Let the cleaning equipment do the work for you. Thanks to the special sand placed in the filter, you will get rid of even the smallest dirt that gets into your pool. By purchasing this device, you will achieve complete recirculation of the pool water and it will remain crystal clear for a long time.

Usage:

- Filtration for pools up to 24 m³

- Indoor and outdoor pools, above ground and in-ground

- Suitable for saltwater pools

Package contents:

- Filter container P350

- Pump FXP 150

- 6 way top valve

- Pressure gauge

- Connecting hose between pump and vessel

- 3× 50 mm fittings for connection to suction and discharge + 2× fittings for connection to pump

Filter sand not included.

Filter function:

The filter uses special filter sand to trap particles of dirt from the pool water. The filter container is filled with filter sand and acts as a permanent dirt trap. When the control valve is in the FILTER position, pool water containing dirt is drawn in through a system of hoses and automatically drawn into the control valve with the patented filter and from there into the top of the filter container. The water is then pushed through the sand, which removes the fine dirt, and drained into the lower part of the container. Through the control valve, the water is returned to the pool via hoses. The whole process is smooth and automatic and ensures complete recirculation of the pool water through the filter and hose system.

After a certain period of operation, the dirt accumulated in the filter will cause the water to deteriorate through the sand and reduce the flow through the filter unit. This means it is time to clean the filter. When you set the valve control lever to the PROPLACH position, the water flow will automatically reverse so that it flows from the bottom of the vessel through the filter sand, flushing the accumulated debris into the waste line. When the filter has been flushed, set the lever to the FILTER position and run the pump for one-half to one minute; then set the valve lever back to the FILTER position to resume normal filtering.