Automatika VArio F1SC - Filtration + Lights + Dosing with Self Measurement

The automation includes a built-in VArio pool control module and is used to simplify installation and electrical wiring as much as possible. There are labeled sockets on this automation for the respective device. Connection is made by a flex cable plugged into the socket.

Thanks to the intelligent VArio system, individual elements of pool technology can be controlled via the internet, local WIFI network, or remote control. It is always necessary to purchase a WIFI module or an RC module in addition to the DIN module. The DIN module itself does not have a control interface.
More information about individual control options can be found in the 'Download' tab.

The ideal basic combination is the VArio DIN module automation with the WiFi module because it allows pool control via the internet as well as remote support and system diagnostics.

The automation can be supplemented with an RC module for direct local control. The RC module also has IP 65 protection, which makes it resistant to splashing water or rain, and it can be placed next to the pool even while swimming.

Installation - 3 simple steps:

• Secure the automation to the wall
• Plug the pool technology into the corresponding socket
• Connect the entire automation to the socket using the supplied flex cable.

The F1SC automatic control system can be connected to:

• Single-phase filtration (230 V)
• Lighting
• Dosing device with self-measurement (VA SALT SMART / VA DOS)

! The maximum total power for VArio automation with a flex cable is 3.5 kW !
For higher power requirements, please order a custom-made switchboard equipped with a fixed connection (not a flex cable).

 

Note: When installing the intelligent VArio system on an existing installation, we recommend consulting about communication with the dosing station.

Note: When installing the intelligent VArio system on an existing installation, we recommend consulting about communication with the dosing station.

.