AZ Multi 5in1 3kg

Azuro Multi 5in1 is a new generation of multifunctional tablets. It is a very practical multi-purpose disinfectant for regular and comprehensive water care. Now also in 3 kg packages.

Action: Azuro Multi 5in1 is a disinfectant (type 2), which is designed for regular maintenance of pool water and provides 5 functions in one: disinfects water (thus ensuring its health safety), stabilizes pH, flocculates (aggregates impurities into flakes for easier capture in filtration), softens water (reduces scale formation) and prevents algae formation - thus keeping the water transparent and crystal clear. After immersion of the tablet in water (preferably with the help of a float), there is a gradual release of all active ingredients.

Instructions for use: In general, to achieve clean and hygienic water, the pH should be in the range of 7.0 – 7.4 and the free chlorine content in the range of 0.3 – 0.6 mg/l (at water temperatures above 28°C, a higher content of up to 0.8 mg/l is recommended). If the chlorine content falls below 0,3 mg/l, chlorine should be added. If the free chlorine content is higher than 0.8 mg/l, do not use the pool, reduce the chlorine dosage and wait for this value to drop. Before using the product, check and adjust the pH value to 7.0 – 7.4 and then check and adjust it regularly. After filling the pool, carry out preventive treatment of the pool water with the rapidly soluble chlorine preparation Azuro Chlor shock G and the chlorine stabilizer Azuro Chlor Stabil. Multi 5in1 tablets must be added the next day after the first chlorination.

Important: For proper use of the product, it is necessary to use a test kit to measure the pH value and the free chlorine content. For testing, you can use the Azuro drop tester or the Azuro Quick Check 4in1 strip tester. Regularly, at least 2 times a week, measure the pH value and the concentration of free chlorine. Dosage: Depending on the water temperature, add 1 to 2 tablets per 30 m3 of water every 5-8 days; up to 25°C 1 tablet and above 25°C 2 tablets. Method of application: Float: insert the required amount of tablets into the dosing float. Let the float move freely on the surface of the pool, where there is more movement of water. With the dispenser built into the circulation pipe: put the necessary amount of tablets in the dispenser. Set the control valves of the dispenser so that the chlorine content is approximately observed.

Note: The above information is for informational purposes only. Before applying, carefully read the instructions for use! Use biocidal products safely. Always read the label and the accompanying product information before use. Information on the hazard type according to Regulation (EC) No 1272/2008 of the European Parliament and of the Council: DANGER - May cause death if ingested and entered the airways. Irritates the skin. May cause an allergic skin reaction.